Checking for non-preferred file/folder path names (may take a long time depending on the number of files/folders) ...

Dan River, North Carolina - velocity, sediment, and survey data from 2019


Authors:
Owners: This resource does not have an owner who is an active HydroShare user. Contact CUAHSI (help@cuahsi.org) for information on this resource.
Type: Resource
Storage: The size of this resource is 3.8 MB
Created: Nov 28, 2023 at 8:46 p.m.
Last updated: Nov 30, 2023 at 5:56 p.m.
DOI: 10.4211/hs.a79f3ec8559341bb83cd1dd5705a49f1
Citation: See how to cite this resource
Sharing Status: Published
Views: 169
Downloads: 2
+1 Votes: Be the first one to 
 this.
Comments: No comments (yet)

Abstract

Velocity, stage, sediment, and survey data collected in 2019 in the Dan River, North Carolina, in support of:

Sumaiya Sumaiya, Jonathan A. Czuba, William T. Russ, and Rachael Hoch (in review) Potential for Juvenile Freshwater Mussels to Settle onto Riverbeds from Field Investigation

This dataset contains data collected in 2019 from the Dan River upstream of its confluence with Big Creek at US Highway 89 in North Carolina.

GIS shapefile data
Survey data
Sediment data
Uplooking velocity data
Cross section velocity data
Pressure transducer data

Subject Keywords

Coverage

Spatial

Coordinate System/Geographic Projection:
WGS 84 EPSG:4326
Coordinate Units:
Decimal degrees
Longitude
-80.2846°
Latitude
36.4476°

Temporal

Start Date:
End Date:

Content

README.txt

This dataset contains data collected in 2019 from the Dan River upstream of its confluence with Big Creek at US Highway 89 in North Carolina.

GIS shapefile data
Survey data
Sediment data
Uplooking velocity data
Cross section velocity data
Pressure transducer data

Complied by Jon Czuba, Virginia Tech, jczuba@vt.edu, on 13 February 2023.


--------------------------------------------------------
GIS SHAPEFILE DATA:

Dan_JSM_survey_shapefiles.zip
/LP3_snapped.shp
/LP3_rawGPS.shp
/LP2_snapped.shp
/LP1_snapped.shp
/LP1_measured.shp
/Dan_JSM_XS_survey_points_snapped.shp
/Dan_JSM_XS_survey_points_measured.shp
/Dan_JSM_LP_cl_clip.shp

Contains ArcGIS shapefiles associated with the survey data. All data is in NAD 83 UTM 17N meters. 


--------------------------------------------------------
SURVEY DATA:

Dan_JSM_Survey_FINAL_XS_analysis.xlsx

Contains the survey data for 4 cross sections, long profile (3 pieces and composite), and extra points of interest.

All data is in NAD 83 UTM 17N meters and NGVD88 meters. 

27 June 2019:
cross sections 1 and 2
long profile 1

25 July 2019:
cross sections 3 and 4
long profile 2

24 July 2019:
long profile 3

The biggest uncertainties/errors are with cross section 4, and long profiles 2 and 3.

The stage on 6/27 and 7/25 were the same. 
The stage on 7/24 was 0.11 m higher, and was accounted for in processing by lowering the water surface elevation (WSEL) from that day down by 0.11 m to create a composite 6/27 (or 7/25) WSEL for the reach.


--------------------------------------------------------
SEDIMENT DATA:

Sediment_Data.xlsx

Contains the sediment grain size distribution data for sieved sand samples and point counts for gravel.


--------------------------------------------------------
UPLOOKING VELOCITY DATA:

XS1_velocity(HW89).xlsx
XS2_velocity(HW89US).xlsx

Contains the GPS location of each sensor, date/time, depth, velocity, shear velocity, water temperature, and water-surface elevation.


--------------------------------------------------------
CROSS SECTION VELOCITY DATA:

velocity_data_6_27_2019_final.xlsx

Contains the velocity measurement data that were made at cross-sections 1 and 2 on 27 June 2019 using a Marsh-McBirney Flo-Mate 2000 electromagnetic velocity meter as wading-discharge measurements. 
At each location, velocity measurements were made every 4 feet along the cross sections (to measure at least 20 verticals) with a point velocity measured at 0.6 depth or as an average of 0.2, 0.6, and 0.8 depth where the depth was greater than 1.5 feet. 
During these measurements, a survey tape was stretched across each cross section, 0 feet at the left bank.
The spatial locations of some of the stationing was surveyed during the 27 June 2019 survey and noted for specific survey points.
Those data can help the end user spatially locate these velocity measurements if desired.


--------------------------------------------------------
PRESSURE TRANSDUCER DATA:

DanJSM_Stage_Temp.xlsx

Contains pressure and temperature data from two pressure transducers.
These sensors are Onset HOBO water level data loggers (pressure and temperature sensor; Onset, Bourne, Massachusetts).
They were deployed between 24 May 2019 and 6 November 2019 and recorded data at 15-min intervals. 
One pressure transducer was placed in a tree in the right floodplain.
The other was placed in the stream along the right bank just upstream of cross-section 1.
The location of the in-stream pressure transducer was surveyed during the 27 June 2019 survey.
Depth above the sensor at the in-stream pressure transducer was calculated by differencing the in-stream pressure from the atmospheric pressure.
Both sensors started recording before they were in position, so the first (and last) several hours of data recorded by the in-stream sensor were out of water.
The in-stream sensor may have been above the water line during some of the period of data collection (elevation values can be confirmed by comparing with the survey and uplooking velocity data).

How to Cite

Czuba, J., F. Sumaiya (2023). Dan River, North Carolina - velocity, sediment, and survey data from 2019, HydroShare, https://doi.org/10.4211/hs.a79f3ec8559341bb83cd1dd5705a49f1

This resource is shared under the Creative Commons Attribution CC BY.

http://creativecommons.org/licenses/by/4.0/
CC-BY

Comments

There are currently no comments

New Comment

required